|
18Sound BR215
|
source: Robert Nillson
Inleiding:
The BR215 kit was designed to be a big sounding double 15 reflex woofer that should be used whenever the highest standards are needed. This kit delivers very much and rich sounding bass from a compact size subwoofer.Its recommended in both portable and permanent installation applications. Since its size matches the other subwoofers in this kit series, thanks to its 60cm standard width it can also be integrated in the most popular PA systems.
Luidsprekers:
The 15W1300 transducer was chosen especially for its natural sounding linear displacement, that provides an ultra linear piston action across the entire working range. This kit can deliver a deep tight bass and handle extreme power. Its also suitable as woofer and low mid bass cabinet. An active crossover or a programmable processor must be used. The low pass filter should be set for subwoofer and or as woofer/low mid bass according to the application required. The crossover point is recommended not to be higher than 180Hz when used as subwoofer and 500 Hz when used as mid bass application depending on the model used. Its tuning frequency has been studied and tested for optimum impedance load and the possibility to withstand extra power at the frequencies that gives you the kick (round 45-55 Hz).Designed for 15W1300.
Recommended for 15W1200 and 15LW1401 (extra filling in the box).
Suitable also for 15W700.
Downloads
ConstructionFrequency plots
Figuren
Copyright©[2003-2009] | disclaimer | voorwaarden | home | contact | hosting by jerrisoft.nl
